Silent quartz clock movement – for wall clocks, table clocks & DIY projects
High-quality, silent quartz clock movement for wall clocks, table clocks, and creative DIY projects. The second hand glides smoothly across the dial – absolutely no ticking. Ideal for bedrooms, living rooms, or offices where quiet is important.
Whether you want to repair an old clock, make a record clock, or design your own dial – this movement is the perfect base.
Choose the appropriate shaft length depending on the thickness of your dial.
Shaft length → max. dial thickness:
- 10.5 mm → up to 1 mm
- 12.5 mm → up to 3 mm
- 16.5 mm → up to 5 mm
- 20.0 mm → up to 8 mm
- 22.5 mm → up to 11 mm
- 28.0 mm → up to 17 mm
- 32.0 mm → up to 21 mm
Matching hands: All 3-piece hand sets from our shop are compatible.
Scope of delivery:
- Quartz clock movement
- Metal hanger (removable)
- Copper washer
- Rubber washer
- Nut
Clock movements: General technical information
Material: Plastic, metal.
Color: black
Power supply: AA 1.5V battery x 1 (not included).
Dimensions, mm (WxHxD):
56 x 56 x 16.5
Diameter, mm:
Thread: 7.8
Hour hand shaft: 5.1
Minute hand shaft: 3.2
Second hand shaft: 0.74
⚠️ Variant 10.5 mm: Delivery without accessories (no hanger, no washers, no nut).
Assembly:
- If necessary, attach the metal hanger to the clock movement.
- Place accessories on the shaft in the following order: first the rubber washer, then the copper washer.
- Thread the shaft from the back through the hole in the dial.
- On the front, screw on and tighten the nut screw.
- Carefully place the hour, minute, and second hands onto the hand shaft with light pressure. Align all hands to 12:00 o'clock and ensure they are parallel to each other.
- Set the time using the adjustment wheel on the back.
- Insert the battery. If the movement is running, correct the time again using the adjustment wheel if necessary.